产品描述
|
|
---|---|
AN-98 - LinkSwitch-TNZ Family Buck and Buck-Boost Design Guide |
Description
This application note provides information for designing a non-isolated power supply using the LinkSwitch-TNZ family of devices. This document describes the design procedure for buck and buck-boost converters. |
AN-79 - Wave Soldering Guidelines for InSOP and HSOP Packages |
Description
This document offers guidelines for wave soldering design of InSOP-24 and HSOP-28 packages, particularly those without bottom exposed pads. Although IR/convection reflow is recommended for surface-mount attachment, both packages have been designed with wave soldering in mind when it is unavailable or not preferred. The document provides recommendations for solder pad layout, maximum spacing between solder pads, and solder thieves' orientation and design. |
AN-75 - LYTSwitch-6 产品系列设计指南 |
Description
LYTSwitch-6 产品系列设计指南 |
AN-70 - LinkSwitch-TN2 设计指南 |
Description
|
AN-65 LYTSwitch-5应用指南 |
Description
|
AN-60 - LYTSwitch-0 应用指南 |
Description
LYTSwitch-0 应用指南 |
AN-59 - LYTSwitch-4 Design Guide |
Description
|
AN-303 - Qspeed Family RoHS Compliant Soldering Considerations |
Description
Qspeed Family RoHS Compliant Soldering Considerations |
AN-302 - Qspeed Reverse Voltage Sharing of Series Rectifiers |
Description
Reverse Voltage Sharing of Series Rectifiers |
AN-301 - Qspeed Reverse Recovery Charge, Current and Time |
Description
Reverse Recovery Charge, Current and Time |
AN-300 - Qspeed High Temperature Reverse Bias (HTRB) Reliability Testing |
Description
Qspeed High Temperature Reverse Bias (HTRB) Reliability Testing |
应用指南AN-55 HiperLCS 产品系列 |
Description
应用指南AN-55 HiperLCS 产品系列 |
AN-39 - LinkSwitch-LP 反激式设计指南 |
Description
LinkSwitch-LP 反激式设计指南
|