ソリューション ファインダー 技術サポート

バッテリーマネージメントシステム

Battery Iconバッテリー管理システム (BMS)

The battery pack is the most expensive single component in an EV and contains detailed monitoring and control to maintain a long, safe operating life. The BMS is responsible for monitoring individual cell health, balancing, operating pack heating and cooling systems, reporting state of charge and disconnecting power from the vehicle in a fault or collision.

This monitoring must continue even when the vehicle itself is parked and not in use. So that, for example, the pack heater can be engaged to maintain acceptable temperature in very cold conditions. This makes energy efficiency and minimizing the load on the HV battery critical to minimize range loss or worst case to prevent a dead vehicle.

PI's reinforced isolated flyback and non-isolated buck converter products are idea for generating internal low voltage supply rails. The extremely low no-load consumption and high efficiency reduce background discharge of the HV battery. Overall power loss is lower than relying on the 12 V system and provides the BMS the ability to continue to operate on loss of the 12 V system (discharged 12 V battery).

デザイン例

Additional Documents
Design
製品
DER-952Q - 86 W Power Supply for 800 V Bus Using InnoSwitch3-AQ (1700 V SiC Switch)
Product InnoSwitch3-AQ
DER-1035Q - 70 W Power Supply Replacing 12 V Battery in 400 V BEV Systems Using InnoSwitch3-AQ (1700 V SiC Switch)
Product InnoSwitch3-AQ
DER-953Q - 100 W Power Supply Replacing 12 V Battery in 400 V BEV System Using InnoSwitch3-AQ (900 V PowiGaN Switch)
Product InnoSwitch3-AQ
DER-965Q - 10 W Non-Isolated Buck Power Supply for 400 V BEV Systems using Automotive-Qualified LinkSwitch-TN2Q
Product LinkSwitch-TN2Q
DER-948Q - 35 W Power Supply for 800 V Bus with 30-1000 VDC Input and 15 V Output Using InnoSwitch3-AQ (1700 V SiC Switch)
Product InnoSwitch3-AQ
RDR-707Q - 9.75 W Non-Isolated Buck Power Supply using Automotive-Qualified LinkSwitch-TN2Q
Product LinkSwitch-TN2Q
DER-913Q - 35 W Power Supply for 800 V Bus with 40-1000 VDC Input Using InnoSwitch3-AQ (1700 V SiC Switch)
Product InnoSwitch3-AQ
RDR-919Q - 60 W Power Supply for 800 V Bus with 50-1000 VDC Input Using InnoSwitch3-AQ (1700 V SiC Switch)
Product InnoSwitch3-AQ
DER-719Q - 2.7 W StackFET Buck Power Supply using Automotive-Qualified LinkSwitch-TN2Q
Product LinkSwitch-TN2Q
DER-907Q - 20 W Power Supply for 400 V Bus with Planar Transformer Using InnoSwitch3-AQ
Product InnoSwitch3-AQ
RDR-840Q - 30 W Power Supply for 400 V Bus with 30-550 VDC Input Using InnoSwitch3-AQ
Product InnoSwitch3-AQ
DER-844Q - 4.5 W Non-Isolated Buck Power Supply using Automotive-Qualified LinkSwitch-TN2Q
Product LinkSwitch-TN2Q

関連製品

Related Products
製品
データ シート
トポロジー
電力レベル
概要
Topology Flyback, Secondary Side - FluxLink Regulated
Power Level 100 W
Description

750 V 、900 V & 1700 V耐圧 MOSFET 及び FluxLink フィードバックを備えた車載用 CV/CC QR フライバック スイッチング電源用 IC

Topology Non-Isolated Flyback, Buck/Boost/Buck-Boost
Power Level 850 mA
Description

システム レベルの保護機能を内蔵する部品点数の少ない高効率の車載用スイッチング電源用 IC

追加のドキュメント